Hangzhou Bycon Industry Co., Ltd.
Which Crushing Machinery Is Better for Concrete Breaker?

News

  • 2019 BYCON’s Company Trip to Gorgeous Qinghai

    Qinghai, “big, bold and beautiful barren” as described in Lonely Planet travel guide which is dubbed as thebackpacker's blue bible, at the end of August with more ideal temperature and less visitors...

  • What should be done to the Heating Motor when using Portable Concrete Crusher

    When using portable concrete breaker, themotor will heat up. Generally, customers will think that this is normal and canignore, but it is often because of its neglect that other problems of equipmentw...

  • What is Petrol Jack Oil Seal

    The oil seal of the petrol jack is a seal of the rotating shaft. Its function is to prevent liquid leakage along the rotating axis and external impurities from intruding into the inner part of the pet...

EXHIBITION Information

  • The Big 5 Show Dupai 
    Nov 25-28,2019
    Booth No:Z1E138
  • The 126th Canton Fair
    Oct 15-19,2019
    Phase1 15.2D21-22

Which Crushing Machinery Is Better for Concrete Breaker?

The compressive strength and hardness of concrete is not high, but because of the composition and porosity of concrete, it has good toughness, and can buffer the crushing force. Therefore, the crushing efficiency is very low. So, what kind of crusher should be chosen for concrete breaker? In the process of waste concrete crushing, according to the working principle of grinding, more broken less concrete crusher equipment requires careful configuration, compared with extrusion method should be used under the crusher, jaw crusher is generally selected as the coarse broken, after coarse broken steps add in addition to the steel and iron equipment, steel, iron removal from the waste concrete. Without affecting production, the damage of steel bar and iron block to the equipment is eliminated. When the secondary crushing is generally selected, the impact-type crusher, fine jaw crusher or cone crusher can crush the material to less than 2 cm, basically reaching the selected particle size. If smaller discharge particle size is needed, three-stage crusher can be used. At this time, fine crushing counterattack crusher or roller crusher can be used to further crush the ore to below 10mm.

In actual production, suitable crusher can be selected according to the size of concrete block, usually used in combination with cone crusher, impact crusher, jaw crusher and hammer crusher, and can be used in cooperation with single or multiple units, with features of simple operation, strong controllability and high production efficiency.

However, due to the use of pre-screening needing to increase the height of the plant, when the production capacity of the crusher is surplus, or the use of direct packed feed, no pre-screening. After the use of pre-screening, so that the unqualified grading back to the crusher to check the screening of the crusher production capacity can be improved. However, the adoption of screening inspection will increase investment and complicate equipment configuration in the crushing workshop. Therefore, screening inspection is generally only used in the last crushing section of a crusher, and combined with pre-screening to form a closed cycle of pre-screening.

Hangzhou Bycon Industry Co., Ltd. Offers crusher (cone crusher, impact crusher, portable concrete breaker) for sale and leasing all year round.

Related News

Upcoming Event