Hangzhou Bycon Industry Co., Ltd.
Take you to know about Concrete Breaker

News

  • 2019 The Big 5 International Building & Construction Show

    Last week, Bycon members attended The Big 5 Show in Dubai, which is the largest construction exhibition for the Middle East, Asia and Africa.

  • 1st Anniversary Celebration Of BYCON Day

    The story began in November 20th, 2018, when Damon Chen (General Manager of BYCON) decided to move the whole company to a new site, aiming for better opportunities of BYCON brand and also, considering...

  • Canton Fair: We Are Here To Meet You!

    Here in Golden October, Bycon attended the 126Th Canton Fair 15th- 20th October with premium drill motor and rigs. Yes, we met our old friends and received our new friend during the Fair.It was pretty...

EXHIBITION Information

  • The Big 5 Show Dubai 
    Nov 25-28,2019
    Booth No:Z1E138
  • World of Concrete Asia
    December 11-13, 2019
    Booth No.: W5E12

Take you to know about Concrete Breaker

The petrol concrete breaker, also known as jaw crusher, is suitable for metallurgy, mining, construction, chemical industry, water conservancy and railway departments, as fine crushing, medium crushing compressive strength of various ores and rocks below 250 Mpa. It has the characteristics of large crushing ratio, uniform particle size, low power consumption, convenient maintenance and so on.


Characteristic:

1. The crushing chamber is deep and has no dead zone, which improves the feeding capacity and output.
2. It has large crushing ratio and uniform particle size.
3. Gasket-type adjusting device for discharging inlet and outlet is reliable, convenient and has a large adjusting range, which increases the flexibility of the equipment.
4. Lubrication system is safe and reliable, and component replacement is convenient, and equipment maintenance is simple.
5. It has simple structure, reliable operation and low operating cost. Energy saving of equipment: 15%~30% energy saving of single machine, more than double energy saving of system.
6. The adjusting range of discharging inlet and outlet is large, which can meet the requirements of different users.
7. Low noise and less dust.


Matters needing attention:

Before using the machine, the fasteners of all parts, especially the lubricating parts and bolts, should be inspected. The lubricating parts must keep enough oil, and we should fasten the loose bolts, clean up the residue in the crushing chamber, and then start production. In normal work, attention should be paid to the uniformity of cutting materials. We should not add the whole at one time and should not add when it has a lot. Too much will cause mechanical blockage. Moving jaw plate, static jaw plate, both sides of guard plate, roof are vulnerable parts, which should be paid attention to maintenance.

Related News

Upcoming Event