Hangzhou Bycon Industry Co., Ltd.
Full-Automatic Post Knocker


  • 2019 BYCON’s Company Trip to Gorgeous Qinghai

    Qinghai, “big, bold and beautiful barren” as described in Lonely Planet travel guide which is dubbed as thebackpacker's blue bible, at the end of August with more ideal temperature and less visitors...

  • What should be done to the Heating Motor when using Portable Concrete Crusher

    When using portable concrete breaker, themotor will heat up. Generally, customers will think that this is normal and canignore, but it is often because of its neglect that other problems of equipmentw...

  • What is Petrol Jack Oil Seal

    The oil seal of the petrol jack is a seal of the rotating shaft. Its function is to prevent liquid leakage along the rotating axis and external impurities from intruding into the inner part of the pet...

EXHIBITION Information

  • The Big 5 Show Dupai 
    Nov 25-28,2019
    Booth No:Z1E138
  • The 126th Canton Fair
    Oct 15-19,2019
    Phase1 15.2D21-22

Full-Automatic Post Knocker

The main material of the petrol post knocker is aluminum magnesium alloy. Aluminum alloy pipe is light in weight, strong in bearing capacity, convenient to handle and easy to operate, and is highly praised by the majority of electric power construction units.

The petrol post knocker is composed of three rods, so it is also called a tripod petrol post knocker or a tripod fast post knocker.

The lengths of wire rods that can be assembled by tripod petrol post knocker are: 8m wire rod, 10m wire rod, 12m wire rod and 15m wire rod.
Use of aluminum alloy post knocker: it is used to lift small single pole or general weight parts in the construction of power transmission and distribution lines. Note: The gasoline engine is model 185. The safety factor of post knocker is 2.5.

Features: 1. The rod body is made of national standard aluminum alloy tube, with light weight and strong bearing capacity.2. It is convenient to assemble and disassemble. Using triangular stability, it is easy to erect a pole without ground anchor.3. Using gasoline engine as power, combined with double pulley blocks. A single person can start the gasoline engine to finish the erecting work.

1. Connect the heads of the main rod (long rod) and the two auxiliary rods with the pins attached to the main rod of the petrol post knocker.
2. Lay the three rods in a triangular shape on the ground, and the joint of the heads of the three rods shall be located at the pole pit.
3. The three construction personnel, each holding a rod body, pushed the machine up and set it up. In order not to make the rod body shift left and right when pushing up, keep the heel of the three rods from leaving the ground, and keep the pushing distance equal when pushing up the three rods.
4. After setting up the tripod petrol post knocker, make sure that the head joint of three rods is perpendicular to the bottom of the pole pit.
5. Transport the pole to the appropriate position

Related News

Upcoming Event